Price:
$50.99
Free Shipping
Classification | |
Product Type | LED Flashlights |
Aesthetic | |
Color | Black |
Material | Aluminum-III |
Construction | |
Waterproof | IPX8 |
Electronic Components | |
Low Voltage Warning | Yes |
Reverse Polarity Protection | Yes |
Flashlights | |
Beam Range | 123 m |
Flashlight Modes |
A Group: Lo > Mid > Hi > Turbo (Main/Sub-levels) B Group: Lo 2 > Mid 2 > Hi 2 > Turbo 2 (Edit Level) |
Mode Count | 8 |
Mode Memory | Yes |
Reflector Type | Aluminum Smooth/SMO |
Switch Placement | Side |
Switch Type | Clicky |
Tail Stand | Yes |
Light Sources | |
Light Source Brand | Cree |
Light Source Color | 3500-5500K |
Light Source Model | XM-L2 |
Lumens (Max) | 1200 LM |
Power & Batteries | |
Batteries Included | No |
Battery Form Factor | 18650/RCR123/CR123A |
Required Battery Count | 1 / 2 / 2 |
Manufacturer | |
Brand | SKILHUNT |
Package | |
Package Type | Retail |
Package Contents | 1*LED Flashlight, 1*USB Magnetic Charger Cable, 1*Magnet Replace Rubber Pad, 1*User Manual, 1*Warranty Card, 1*Spare O-ring, 1*Headband, 1*Lanyard, 1*Clip |
Dimensions us | metric | |
Depth | 23.5 mm |
Height | 101.5 mm |
Width | 23.5 mm |
Product Weight | 48 g |
FastTech | |
SKU | 9744982 |
DATE LISTED | 10/15/2021 |
Details:
- Double UI
- Mode group A, Keep the H03 main operation way.
- Mode group B, Customized operation way with editable.
- Max peak beam intensity: 3800cd
- Impact resistant: 1 Meter
- Rated Range: 2.7V-8.4V
- Head diameter 23.5mm
- Body diameter 21.6mm
- Operation
- Battery
installation & Replace magnet: Insert the battery into the
flashlight,the battery positive pole toward the light head.Ensure
batteries are inserted correctly, the flashlight will not operate with
incorrectly inserted batteries. Ensure when the light turning on,the
beam is directed away from the eyes.When take the light with
Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber
pad. - Turn ON/OFF & Mode transfer
- Transfer Mode A
/ Mode B: When headlamp is turned off without lockout, hold press side
switch 5 seconds, light will flash three times faster then flash three
times slow. - Mode Group A
- When the flashlight was OFF status:
- Click switch to memorized brightness level.
- Quickly double click switch to Turbo(T1/T2).
- Quickly triple click switch to Strobe(S1) mode.
- Press switch 0.5 second to Low(L1/L2) mode.
- When the flashlight was ON(any mode) status: Press and hold the side switch 0.5 second to turn off.
- Brightness & mode selection:
- Brightness level:
- Press side switch to Low-Mid-High-Turbo, cycle.
- Quickly double press the side switch to Sub-level(i.e between L1 & L2), turn off memorized the last brightness.
- Quickly triple press to Special modes.
- Special
modes: Quickly triple press the side switch to Strobe (S1), then
double-click to switch S1/S2/S3 mode, Press side switch back to previous
brightness level. - Mode Group B
- When the flashlight was OFF status:
- Click switch to memorized brightness level.
- Press switch 0.5 sec,to L2.
- Quickly double click switch to Turbo(T1) mode.
- Quickly triple press to Special modes(S1).
- When the flashlight was ON(any mode) status: Click switch to turn off.
- On Common used levels(Editable):
- Hold press switch, brightness levels automatic cycle, and selected mode by button released. Click switch to turn off.
- Quickly triple press enter to Edit levels.
- On Special modes:
- Quickly double click switch to transfer mode S1/S2/S3,click switch to turn off.
- Hold press side switch 1 second to adjust the S1/S2/S3 brightness output level in Low, medium or high.
- Quickly triple press to restore to the factory default flash modes.
- Edit Levels:
- Support to 2 ~ 7 common used levels can be selected
- Enter
to edit level, 7 levels circle automatically. The selected level, side
switch indicator is on. Not selected brightness, side switch indicator
is off. - Factory’s default levels: L2-M2-H2-T2. The indicator light on synchronously when levels automatic cycles.
- Selected / Not selected brightness, Click side switch to turn on / off the corresponding indicator.
- All
selected finished, hold press 1 second the side switch save selected
and quit edit mode. The light will be flash three times, and back to the
lowest selected level. - Restore the factory default levels:
Enter to edit level, then click side switch three times. (Light will be
turn off after three clicks.) - Location indicator &
Lock-out function: When turn off the flashlight, press switch 1.5
second,location indicator switch on and lock-out function activation at
same time,click switch only can switch the indicator on/off, the
indicator light flash every second, locate the flashlight, Easy find the
flashlight in the dark quickly.Press switch 1.5 sec, switch unlock and
enter into low mode. - Power indicator
- Every time turn on , the side indicator will be light 5 seconds to display the battery power.
- Blink four times : battery power in 100%~80%;
- Blink three times : battery power in 80%~50%;
- Blink twice : battery power in 50%~20%;
- Blink one time : battery power below 20%.
- Charging instructions and notices
- In
charging, the red indicator constant light on, when battery almost full
charge, indicator change to constant blue light. When the red indicator
flash, please check battery contacts good or not. - Warning:
Rechargeable function only for one 18650 (3.6/3.7V) rechargeable lithium
battery! Please make sure the battery is correctly insert, otherwise it
will damage the charging system. - Features
- U.D.O.C
Reflector. Increased reflectivity over 10%., Efficiency reflection,
perfect beamshot, excellent structure and temperature resistance. - Rugged indestructible aluminum body with anti-scratching type III hard anodization
- Multi-level
dissipating heat design and new copper starboard, excellent heat
dissipation. Flashlight head integrated construction, high thermal
conductivity. - Side switch button to transferring mode, user-friendly interface to adjust output.
- Two mode groups plus editable brightness, more use options for choose.
- Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode.
- Automatic memory function, remember last used setting and can be preset to specific output mode for instant access.
- Intelligent temperature control technology for flashlight stable and safe use.
- Reverse polarity protection, to protect from improper battery installation.
- When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected.
- When light lockout, location indicator will flash, easy get the light in dark.
- Magnetic tail, can be used in many special occasions, use as candle light, etc.
- Usage and Maintenance
- Use quality batteries so as not to damage the light due to leaks or other self-destructive possibilities.
- Remove batteries when light will not be used for an extended period or if batteries are discharged.
- When
using Li-ion batteries,we recommends the use of protected batteries.
Clean contacts, threads and O-rings of the flashlight with clean cloth
from - time to time when necessary.
- Should flickers or doesn’t light up this the most likely cause.
Questions?
We'd love to help! Contact Customer Advocates.
This item is covered by FastTech's Standard Return Policy:
Return for refund within: 45 days (details)
Return for replacement within: 6 months (details)
No restocking fee. Shipping charges may apply if returns are not results of FastTech's error.
Available models and parts:
$50.99
FREE SHIPPING ELIGIBLE
1*Cree XM-L2 LED / 2-group/8-mode / 1200LM / 3500-5500K / 1*18650/2*RCR123/2*CR123A / IPX8 / 123m beam range / magnetic tail
$49.99
FREE SHIPPING ELIGIBLE
1*Cree XM-L2 LED / 2-group/8-mode / 1200LM / 6500K / 1*18650/2*RCR123/2*CR123A / IPX8 / 123m beam range / magnetic tail
head(“storefront.15.min.js”, function () {
ProductGrid.init();
});