Convoy S11 LED Flashlight

Price:
$28.72

Free Shipping

Classification
Product Type	LED Flashlights
Light Sources
Total LED Count	1
Light Source Color	4000-4500K
Lumens (Max)	2500 LM
Aesthetic
Color	Grey
Material	Aluminum Alloy
Electronic Components
Low Voltage Warning	Yes
Reverse Polarity Protection	Yes
Flashlights
Beam Range	265 m
Lens Type	AR Coated Glass Lens
Mode Memory	Yes
Reflector Type	Aluminum Textured/OP
Switch Placement	Tail
Switch Type	Clicky
Tail Stand	Yes
Zooming	No
Power & Batteries
Batteries Included	No
Battery Form Factor	26650/18650
Maximum Supported Battery Length	65 mm
Required Battery Count	1
Manufacturer
Brand	Convoy
Package
Package Type	Plain
Package Contents	1*LED Flashlight
Dimensions us \| metric
Depth	33 mm
Height	139 mm
Width	33 mm
Product Weight	167 g
FastTech
SKU	9740127
DATE LISTED	5/21/2021

Details:

Voltage: 3.7-4.2V
Color rendering index: above 90
Illumination: 17.5KCD (Max)
Light emitting angle of full spot: 87 degrees
Central spot light angle: 40 degrees
Head diameter: 33mm
Tube diameter: 33mm
Tail diameter: 33mm
Reflector diameter: 33mm
Drive:
Maximum output current of 2.5A, constant current without flicker,
built-in temperature control current slow down function.
The
number of batteries required: one 26650 or one 18650 lithium battery
(not included), there are two 18650 to 26650 O-rings inside.
(Requirement: The battery used by this flashlight can withstand more
than 10A current.)
Flashlight memory function: if the flashlight is disconnected for more than 3 seconds, the current gear will be memorized.
Low
voltage protection: When the battery working voltage (not no-load
voltage) is 3.0V, the flashlight will give an alarm, showing weak
brightness and flickering. The flashlight turns off automatically at
2.8V.
Battery reverse connection protection: the flashlight does
not light up when the battery is reversed, and there will be no
abnormalities other than that, so there is no need to worry about
burning the battery or the circuit.
Temperature protection
management: When the temperature control chip detects 55 degrees Celsius
(the case temperature should be lower than this value), it will
automatically reduce the current.
12 groups of debugging text description:
Click the switch to turn on/off the flashlight, half-press the switch to select the mode
If
the flashlight is turned on, quickly half-press the switch 20 times to
enter the configuration mode. (On a visual interface (such as a mobile
phone), as long as you click on an option, it means that the option is
selected. The flashlight has no visual interface, and it uses flashing
to indicate an option, and "half-press the switch during flashing" means
Select this option.)

Option 1 (normal flashing once +
buzzing flashing): half-press the switch to enter the sub-options, start
to select the gear group, if the user does not operate, the
configuration mode enters option 2.

Sub-option 1.1 (normal
flashing once): Touch the switch to select gear group 1 (0.1%, 1%, 10%,
35%, 100%, strobe, beacon, battery detection)
Sub-option 1.2 (normal flashing twice): Touch the switch to select gear group 2 (0.1%, 1%, 10%, 35%, 100%)
Sub-option 1.3 (normal flashing 3 times): Touch the switch to select gear group 3 (100%, 35%, 10%, 1%, 0.1%)
Sub-option
1.4 (normal flashing 4 times): Touch the switch to select gear group 4
(1%, 20%, 100%, flash, strobe, beacon, power detection, SOS)
Sub-option 1.5 (normal flashing 5 times): Touch the switch to select gear group 5 (1%, 20%, 100%)
Sub-option 1.6 (regulation flashes 6 times): Touch the switch to select gear group 6 (100%, 20%, 1%)
Sub-option
1.7 (normal flashing 7 times): Touch the switch to select gear group 7
(0.1%, 1%, 10%, 50%, strobe, beacon, power detection, SOS)
Sub-option 1.8 (normal flashes 8 times): Touch the switch to select gear group 8 (0.1%, 1%, 10%, 50%)
Sub-option 1.9 (Normal flashing 9 times): Touch the switch to select gear group 9 (50%, 10%, 1%, 0.1%)
Sub-option 1.10 (normal flashing 10 times): Touch the switch to select gear group 10 (1%, 10%, 35%, 100%)
Sub-option 1.11 (normal flashing 11 times): Touch the switch to select gear group 11 (100%, 20%, strobe)
Sub-option 1.12 (conventional flashing 12 times): Touch the switch to select gear group 12 (100% single gear)

Option
2 (normal flashing twice + buzzing flashing): half-press the switch to
activate or deactivate the gear memory. If the user does not perform any
operation, the flashlight will enter the last gear.
Power
detection instructions: <2.95V flash once, 2.95-3.25V flashes twice,
3.25-3.55V flashes 3 times, 3.55-3.85V flashes 4 times, >3.85V
flashes 5 times