Free Shipping

Product Type

LED Flashlights


6063-T6 Aluminium with Durable Type-III Hard Anodized Coating
Secondary Material

Stainless Steel Bezel Ring

USB Type C

Electronic Components
Reverse Polarity Protection

Beam Range

1296 m
Flashlight Modes

Step Ramping: Turbo > Hi > Mid 1 > Mid 2 > Lo > Moon
Smooth Ramping: Turbo > Celling to Bottom > 1st Thermal Stepdown > 2nd Thermal Stepdown
Lens Type

Ultra-clear AR Coated Optical Glass Lens
Mode Memory

Reflector Type

Aluminum Smooth/SMO
Switch Placement

Switch Type

Tail Stand

Light Sources
Light Source Brand

Light Source Color

Light Source Model

Lumens (Max)

5200 LM
Power & Batteries
Batteries Included

Battery Form Factor

Maximum Supported Battery Length

70 mm
Required Battery Count

Estimated Usage Time

up to 300 Hours

Package Type

Package Contents

1*Flashlight, 1*Clip
Dimensions us | metric

65 mm

172 mm

65 mm
Product Weight

210 g
SKU 9745595
DATE LISTED 10/29/2021

  • Head diameter: 65mm
  • Tube diameter: 26.5mm
  • Intensity: 400kcd
  • Durable electronic side switch
  • High Conductive Silver-Plated 17530 BeCU Bypassed Springs
  • High efficiency 6A constant current buck driver  (>90%   efficiency) with FET Turbo
  • True 2A USB-C in-built smart battery charging  capability
  • Operating range 2.7V to 4.3V

User Interface

  • Latest Anduril2 open-source firmware   with Simple and Advanced UI
    • Simple UI:  6A maximum regulated current
    • Advanced UI: 6A maximum regulated current with Turbo
  • Fully configurable modes of operation:  smooth ramp to stepped ramp
  • Fully configurable auxiliary LED effects and modes
  • Automatic,  manual, or hybrid memory modes
  • Continuously monitored battery current,  voltage, and temperature with 2.8V battery cut-off
  • Ability to customize highest and lowest output levels
  • Ability to customize thermal regulation (50C by default)
  • Large variety  of beacon,  SOS,   tactical  strobes,  and special effects including: Candle flicker, thunderstorm, bicycle light, sunset timer and more!
  • Readout of battery voltage, internal temperature
  • Electronic factory reset capability
  • Lock-out mode capability
  • Manual:


○ +-1C  factory calibrated thermal accuracy
○ Optimized low parasitic drain  (if aux. LEDs disabled )
○ Removable Metal pocket clip
○ High performance copper thermal sink for LEDs
○ 6-pin  programming pads on driver board for hobbyist customization

Operation Guide  

  • The T9R flashlight features the advanced open-source user interface firmware, Anduril2.   For full details of operation,   please see the detailed manual:
  • At the first glance of the UI , most fresh users will feel confused with the UI, But in fact , you can operate the light as easy as other common flashlights.  Just in case you want to try more functions , you need to spend some time to read the manual. If you do not need the advanced features, just do not use it.
  • Anduril2 has two different operating  user-interfaces.   
    • Simple UI – Stepped 5-mode ramping default (Easy to operate for any fresh users)
    • Advanced UI (need to spend some time to read the manual carefully)
  • Enter advanced UI to unlock all the features available. It is simple to switch between Simple and Advanced UI.     
  • Note: Anduril2 has the capability to adjust battery voltage correction and temperature calibration.  The T9R flashlight comes with 1%  voltage accuracy and +-1C temperature accuracy from the factory and does not   need to be calibrated by the user.    
Quick Start
After insertion of the battery and screwing on the end cap,  the light will blink quickly once to confirm that it is operational.  
  • Click once to turn the light on or off
  • Hold the button while light is on to change brightness
  • Release and hold to change brightness the other way
  • Click and hold from off to turn on starting at lowest brightness,  before ramping up
  • Double  click  the  button  to  turn on at highest brightness
  • Battery check mode – three clicks – flashlight flashes battery voltage then turns off

More Advanced Functions   

  • To access additional modes,  switch to the Advanced UI (Read the manual carefully) .
    • Click ten times and hold the last click. The flashlight will flash once, indicating that it is now in advanced UI
    • When in advanced UI,  simply click ten times without holding the last click to transition back to simple UI.
  • Advanced UI has all the features of  Simple UI, and increases brightness modes,  allows access to all the features,  and unlocks Turbo mode.     
    • There are two ways to access Turbo:
    • From off, click twice and hold the second click -  momentary turbo
    • From on, click and hold to the top of the ramp. At the top of the ramp, double click to enter sustained turbo.
  • By default,  the brightness ramp style is Stepped 5-mode Ramping.  
    • While the flashlight is on at any brightness  level, click  three times to switch from stepped ramping to smooth ramping .
    • This ramp style is memorized and applies even when transitioning back to simple UI.
  • Electronic factory reset capability (There is 2 ways for factory reset, back to Simple UI by default)
    • When the light is off, 13 clicks and hold , See blink signal , back to Simple UI
    • Loose a bit the flashlight body, then hold the switch , re-connect the body to the head,  see blink signal,  back to Simple UI

Battery Charging  

  • The T9R includes an intelligent on-board USB-C battery charger  with safety interlocks. The T9R charges  at  2A,  hence is it recommended to connect the T9R to a USB charger source capable of   supplying at least 2A.   
  • A  built-in safety timer prevents extended trickle charging over 2 hours due to abnormal battery conditions.   In case of this,   the red switch LED blinks to indicate a battery fault
  • When a USB-C cable is plugged into the T9R, cyan LEDs l ight up the side switch to indicate that the  power source is good.     
  • During charging, red LEDs also light up the side switch to indicate charging in progress.   When charging is completed,  the red LEDs will turn off.   At completion,  only the cyan LEDs will be left i lluminated.  The red LED will blink if there is a fault in the charging system.  Please only charge  lithium-ion 21700 or 18650 batteries in the T9R.
  • Note:  The flashlight can be fully operated while being charged.  However,  it is  recommended to only run the flashlight at low brightness levels, otherwise the battery will be  discharged faster than it can be charged,  and result in a charger timer lock-out.     

BeamShot Video:


We'd love to help! Contact Customer Advocates.

This item is covered by FastTech's Standard Return Policy:

100% Satisfaction Guaranteed

Return for refund within: 45 days (details)
Return for replacement within: 6 months (details)

No restocking fee. Shipping charges may apply if returns are not results of FastTech's error.

Available models and parts:

1*Luminus STB90.2 / simple & advanced UI / 1*21700/1*18650 / IP66 / 1296m beam distance


1*Luminus STB90.2 / simple & advanced UI / 1*21700/1*18650 / IP66 / 1296m beam distance


1*Osram CULNM1.TG 10W / simple & advanced UI / 1*21700/1*18650 / IP66 / 1540m beam distance


1*Osram CULNM1.TG 10W / simple & advanced UI / 1*21700/1*18650 / IP66 / 1540m beam distance

head(“storefront.15.min.js”, function () {

Payments are securely processed by PayPal:

All major credit cards accepted. 100% Satisfaction Guaranteed.

Leave a Comment