Price:
$143.95
Classification | |
Product Type | LED Flashlights |
Aesthetic | |
Color | Sand Color |
Material | 6063-T6 Aluminium with Durable Type-III Hard Anodized Coating |
Secondary Material | Stainless Steel Bezel Ring |
Connectivity | |
Ports | USB Type C |
Construction | |
Waterproof | IP66 |
Electronic Components | |
Reverse Polarity Protection | Yes |
Flashlights | |
Beam Range | 1296 m |
Flashlight Modes |
Step Ramping: Turbo > Hi > Mid 1 > Mid 2 > Lo > Moon Smooth Ramping: Turbo > Celling to Bottom > 1st Thermal Stepdown > 2nd Thermal Stepdown |
Lens Type | Ultra-clear AR Coated Optical Glass Lens |
Mode Memory | Yes |
Reflector Type | Aluminum Smooth/SMO |
Switch Placement | Side |
Switch Type | Clicky |
Tail Stand | Yes |
Light Sources | |
Light Source Brand | Luminus |
Light Source Color | 6500K |
Light Source Model | STB90.2 |
Lumens (Max) | 5200 LM |
Power & Batteries | |
Batteries Included | No |
Battery Form Factor | 21700/18650 |
Maximum Supported Battery Length | 70 mm |
Required Battery Count | 1 |
Specifications | |
Estimated Usage Time | up to 300 Hours |
Manufacturer | |
Brand | Fireflies |
Package | |
Package Type | Retail |
Package Contents | 1*Flashlight, 1*Clip |
Dimensions us | metric | |
Depth | 65 mm |
Height | 172 mm |
Width | 65 mm |
Product Weight | 210 g |
FastTech | |
SKU | 9745596 |
DATE LISTED | 10/29/2021 |
- Head diameter: 65mm
- Tube diameter: 26.5mm
- Intensity: 400kcd
- Durable electronic side switch
- High Conductive Silver-Plated 17530 BeCU Bypassed Springs
- High efficiency 6A constant current buck driver (>90% efficiency) with FET Turbo
- True 2A USB-C in-built smart battery charging capability
- Operating range 2.7V to 4.3V
User Interface
- Latest Anduril2 open-source firmware with Simple and Advanced UI
- Simple UI: 6A maximum regulated current
- Advanced UI: 6A maximum regulated current with Turbo
- Fully configurable modes of operation: smooth ramp to stepped ramp
- Fully configurable auxiliary LED effects and modes
- Automatic, manual, or hybrid memory modes
- Continuously monitored battery current, voltage, and temperature with 2.8V battery cut-off
- Ability to customize highest and lowest output levels
- Ability to customize thermal regulation (50C by default)
- Large
variety of beacon, SOS, tactical strobes, and special effects
including: Candle flicker, thunderstorm, bicycle light, sunset timer and
more! - Readout of battery voltage, internal temperature
- Electronic factory reset capability
- Lock-out mode capability
- Manual: http://toykeeper.net/torches/fsm/anduril2/anduril-manual.txt
Features
○ Optimized low parasitic drain (if aux. LEDs disabled )
○ Removable Metal pocket clip
○ High performance copper thermal sink for LEDs
○ 6-pin programming pads on driver board for hobbyist customization
Operation Guide
- The
T9R flashlight features the advanced open-source user interface
firmware, Anduril2. For full details of operation, please see the
detailed manual:
http://toykeeper.net/torches/fsm/anduril2/anduril-manual.txt - At
the first glance of the UI , most fresh users will feel confused with
the UI, But in fact , you can operate the light as easy as other common
flashlights. Just in case you want to try more functions , you need to
spend some time to read the manual. If you do not need the advanced
features, just do not use it. - Anduril2 has two different operating user-interfaces.
- Simple UI – Stepped 5-mode ramping default (Easy to operate for any fresh users)
- Advanced UI (need to spend some time to read the manual carefully)
- Enter advanced UI to unlock all the features available. It is simple to switch between Simple and Advanced UI.
- Note:
Anduril2 has the capability to adjust battery voltage correction and
temperature calibration. The T9R flashlight comes with 1% voltage
accuracy and +-1C temperature accuracy from the factory and does not
need to be calibrated by the user.
insertion of the battery and screwing on the end cap, the light will
blink quickly once to confirm that it is operational.
- Click once to turn the light on or off
- Hold the button while light is on to change brightness
- Release and hold to change brightness the other way
- Click and hold from off to turn on starting at lowest brightness, before ramping up
- Double click the button to turn on at highest brightness
- Battery check mode – three clicks – flashlight flashes battery voltage then turns off
More Advanced Functions
- To access additional modes, switch to the Advanced UI (Read the manual carefully) .
- Click ten times and hold the last click. The flashlight will flash once, indicating that it is now in advanced UI
- When in advanced UI, simply click ten times without holding the last click to transition back to simple UI.
- Advanced
UI has all the features of Simple UI, and increases brightness modes,
allows access to all the features, and unlocks Turbo mode. - There are two ways to access Turbo:
- From off, click twice and hold the second click - momentary turbo
- From on, click and hold to the top of the ramp. At the top of the ramp, double click to enter sustained turbo.
- By default, the brightness ramp style is Stepped 5-mode Ramping.
- While the flashlight is on at any brightness level, click three times to switch from stepped ramping to smooth ramping .
- This ramp style is memorized and applies even when transitioning back to simple UI.
- Electronic factory reset capability (There is 2 ways for factory reset, back to Simple UI by default)
- When the light is off, 13 clicks and hold , See blink signal , back to Simple UI
- Loose a bit the flashlight body, then hold the switch , re-connect the body to the head, see blink signal, back to Simple UI
Battery Charging
- The
T9R includes an intelligent on-board USB-C battery charger with safety
interlocks. The T9R charges at 2A, hence is it recommended to
connect the T9R to a USB charger source capable of supplying at least
2A. - A built-in safety timer prevents extended trickle
charging over 2 hours due to abnormal battery conditions. In case of
this, the red switch LED blinks to indicate a battery fault - When a USB-C cable is plugged into the T9R, cyan LEDs l ight up the side switch to indicate that the power source is good.
- During
charging, red LEDs also light up the side switch to indicate charging
in progress. When charging is completed, the red LEDs will turn
off. At completion, only the cyan LEDs will be left i lluminated.
The red LED will blink if there is a fault in the charging system.
Please only charge lithium-ion 21700 or 18650 batteries in the T9R. - Note:
The flashlight can be fully operated while being charged. However, it
is recommended to only run the flashlight at low brightness levels,
otherwise the battery will be discharged faster than it can be
charged, and result in a charger timer lock-out.
BeamShot Video: https://youtu.be/kjU0n_MZZ-E
We'd love to help! Contact Customer Advocates.
Return for refund within: 45 days (details)
Return for replacement within: 6 months (details)
No restocking fee. Shipping charges may apply if returns are not results of FastTech's error.
head(“storefront.15.min.js”, function () {
ProductGrid.init();
});